At present, some customers are not very clear about the maintenance of the vacuum pump, mainly focusing on the simple replacement of three filters and one oil, thus ignoring other maintenance. The efficient and energy-saving operation of the vacuum pump provides a strong guarantee for production and is inseparable from correct maintenance. Therefore, in addition to the normal maintenance of three filters and one oil, attention should also be paid to the maintenance of the motor and valve parts of the vacuum pump. #Maintenance of motor The motor runs every 4000 hours or once a year, whichever comes first, and special high-temperature grease needs to be added (Atlas Copco motor high-temperature grease part No. 2901033803). The motor speed of the vacuum pump is very high. For a commonly used pump, the Z high speed of GHS 900 VSD + is close to 5600 rpm, which is nearly twice as fast as that of the air compressor with the same power of 22KW. Therefore, it is necessary to pay attention to the lubrication of motor bearings. If the motor grease with the wrong model is not added for a long time, it is easy to cause poor lubrication of the motor and damage the motor in serious cases. The bearing of the vacuum pump on the customer's site was damaged and the motor was burnt out due to neglect of the maintenance of the motor. It is suggested that the motor grease filling gun Z of the vacuum pump should be dedicated to avoid mixing with the filling gun used by other different equipment using different types of motor grease. In addition, the motor needs to be overhauled every 24000 hours to avoid sudden damage to the motor and greater loss due to the service life of the motor bearing. #Maintenance of temperature control valve The main function of the temperature control valve is to control the oil temperature and prevent the oil temperature from being too high and too low. If the oil temperature is too low, it will not only affect the lubrication efficiency of the system, but also have the risk of condensate precipitation, which will accelerate the emulsification of vacuum pump lubricating oil and bring risks to the normal operation of the equipment. If the oil temperature is too high, it will accelerate the aging and deterioration of the lubricating oil of the vacuum pump, increase the oil change frequency of customers, bring more maintenance costs and affect the service life of the equipment.
Vacuum Pump Heat Treatment Guide,Heat Treatment Equipment
Smart Kitchens by Superior Living is one of the UAE’s most dominant renovation and project management companies. We are a group of Selected contractors who are here to help you give your kitchen a complete makeover the smart way by our kitchen countertops services. We’re here for you every step of the way.
As of now, a few clients are not exceptionally clear with regards to the upkeep of the vacuum siphon,Essay Writing Service primarily zeroing in on the straightforward substitution of three channels and one oil, hence overlooking other support.